Stainless Steel Filter Housings for emissions testing and chemical analysis

neptech-stainless-steel-electropolished-filter-housings

316 SS Handles

Electropolished
316 Stainless Steel

Cutaway showing
7" Filter Media

316 Stainless Steel Electropolished or Silconert coated

Neptech manufactures the F

lexotherm®

brand of

316

Stainless

Steel filter housings for

use in

emissions

testing and chemical

analysis. Our filters are

designed

for

use in a heated filter set-up

or as a stand-alone filter.

Standard Features

All Models made from 316 Stainless Steel
All components are electro-polished inside and out
Handle Shaft insulated with Teflon®
Positive Handle STOP/DETENT to assure proper position of
assembly
High-Temp Silicone O-Rings
DuPont Krytox® Performance Lubricant
Short Version (1" x 2.5)
Long Version (1” x 7”)

The Base Heated Filter Housing includes

all of the added features

below:

Brushed and Anodized Aluminum Enclosure
JKTE Thermocouple or RTD
Long Version (1x7) includes 120VAC 175-Watt Heating element and
associated insulation
Short Version (1x2.5) includes 120VAC 110-Watt Insulated Heating
Element.
Panel Mount Mini-Twist-Lock Connector to connect to controller
Panel Mount Thermocouple connector

Heated Filter with Valve: — Pneumatically-actuated high-

temperature

heated

ball valve.

(Temp Controller not included)

Manifold Heaters for the Ball Valve and Filter Base
4’ Pigtails with mini twist-lock connectors
4’ Thermocouple lead & connector
24VDC Panel Mount Valve Control Connector
1/4” Female NPT Inlet for Pilot Air

Integrated 4-Channel Temperature Controller

Filter Housing
Valve Body
Aux 1 ( Available to control heated lines or connection heaters)
Aux 2 ( Available to control heated lines or connection heaters)

Options

(Base Model)

Extended Handle (3” longer than std)
Panel Mounting Collar

Note:

Filter assembly is designed for use on the vacuum

side of

the

sample

system. Pressure rating set at low value as

safety

precaution.

Never

remove handle assembly while under

pressure.

Neptech is proud to represent the Micro-Filtration brand of Numatics, Inc., a leading manufacturer of pneumatic products and motion control products.

Numatics broad spectrum of standard, custom developed products and application components have made a significant impact on pneumatic innovation as well as pneumatic and motion control
technology. The company has an extensive history of generating innovative concepts and technological breakthroughs. Many of today's standard features in pneumatic technology were industry firsts from
Numatics. We continue our innovative approach to product development by developing electric motion control solutions and enhancing our embedded Fieldbus and I/O products to continually meet and
solve our customer's application requirements.

MicroPath(TM) Coalescing-Separator
Most coalescing-separators on the market today use multilayered or mechanically wound media - a design which causes particles to plug the outer layers - shortening the service life and change-out
intervals.

MicroPath(TM) - is a proprietary weave of inorganic microfibers of different diameters. MicroPath(TM) media is vacuum formed into individual elements, creating millions of complex, tortuous paths of
varying density. T"his design allows particles to be trapped through the entire cross section of the filter, lowering pressure drop and maximizing capacity.

MicroPath(TM) media is ideally suited for air to fluid separation and hydrocarbon or submicron particle removal. It offers a wide temperature range and compatibility with most fluids and contaminants.

MicroPleat(TM) Particle Media
The life of any media is a function of the amount of solid contaminant subjected to the filter matrix as the pores become blocked, the pressure drop increases and flow decreases. MicroPleat media offers
corrugated pleats which significantly increase surface area and are heated to prevent fiber shedding. MicroPleat has resin-impregnated media to provide high performance particle removal in applications
ranging from food processing to industrial filtration. It is manufactured from special grades of borosilicate glass, cellulose, and synthetically based fibers. MicroPleat media can be used in liquid and gas
applications.

The MicroPath 0.3 micron borosilicate glass fiber element, when magnified 228x, shows deep, tortuous paths and large air pockets which provide high performance contaminate removal and longer life.

Air flows from the inside to the outside of the element through progressively larger openings in the media. As contamination moves through the element, solid particles are trapped and liquids are formed
into large droplets. As the air exits the element, surface tension holds the liquids and allows them to drain to the bottom.

Sample Filters for Diesel Engine Analyzers
Diesel engine exhaust has a high concentration of solid particles, liquid droplets and a high dew point. It is imperative that it be heated to prevent condensation which would affect the reliability of the
testing. To prevent contamination, systems are designed with the filter close to the inlet of the sample system. The filter is heated to prevent condensation upon startup. During operation, the filter gets
exposed to high temperature exhaust gas. We provide stainless steel filter housings wiht silicone seals specifically for the hot conditions of diesel engine exhaust. To ensure that temperatures remain
constant, the body is wrapped in heating tape.

Neptech carries a full line of replacement filter elements that deliver High Filtration Efficiency, Long Life and Low Operating Costs including all major name brands and replacement filter elements,
coalescing filters, coalescent filters, pneumatic filters, filtration devices, heated filters, filter - valves. Neptech manufactures its own line of coalescing filters that are equivalent to brands such as Balston,
Parker-Balston, Parker-Finite, Finite, Domnick Hunter, Filtersoft, Headline, Pioneer, Pall, Wilkerson and more.